| # | Completed | Tower | Description | Contractor | Source |
|---|
| 1 | | Batcombe, Dorset, S Mary Magd | The larger of the two existing bells has been weld-repaired and the smaller of the two has been tuned as bell 1/3 to align with the larger. A third bell has been donated by The Keltek Trust as bell 2/3 to create the back 3 of a ring of 6. These three bells have been hung for ringing in the largest 3 pits of a 6-bell frame, in memory of Christopher Dalton. | Matthew Higby & Co | Matthew Higby |
| 2 | | Bethersden, Kent, S Margaret | Bells and fittings to be removed to Loughborough for conservation and the welding of the 4th in its crown. A new cast iron and galvanized steel bell frame and all new ringing fittings to be manufactured. The old bell frame to be preserved in the tower | John Taylor & Co | David Potter |
| 3 | | Bidford on Avon, Warwickshire, S Laurence | Following the removal of the clock weights shafts in the ringing chamber which has created more space, the rope circle is to be improved with necessary fittings adaptations – Not started | John Taylor & Co | David Potter |
| 4 | | Bovey Tracey, Devon, S John | General overhaul; bells to be rehung for electrically operated chiming. – Not started | Nicholson Engineering Ltd | Andrew Nicholson |
| 5 | | Brightlingsea, Essex, All Saints | Tubular bells to be restored and equipped with electric hammers; conventional bells to be restored. | Nicholson Engineering Ltd | Andrew Nicholson |
| 6 | | Burnley, Lancashire, S Mark | Following the closure of the church, the bell will be transferred to Hawes Side, St Christopher & St Nicholas – Not started | John Taylor & Co | David Potter |
| 7 | | Clyro, Powys, Wales, S Michael | New treble cast by Westley Group to augment to six. Not yet hung | (unidentified) | Mark Walker, Whites of Appleton |
| 8 | | Dogmersfield, Hampshire, All Saints | Ring to be augmented from three bells to six using three newly cast trebles; bells to be rehung with all new fittings in a new frame | Matthew Higby & Co | Matthew Higby |
| 9 | | Earls Colne, Essex, S Andrew | The 8 bells to be rehung on all new fittings in the existing, restored frame. Removal of canons from all bells, and bells to be tuned. | Nicholson Engineering Ltd | Jason Brett |
| 10 | | East Woodlands, Somerset, S Katherine | Bells to be conserved and rehung with all new fittings for manual stationary chiming; sanctus bell to be conserved and rehung with all new fittings for swing-chiming | Matthew Higby & Co | Matthew Higby |
| 11 | | Hampton, Greater London, S Mary V | Bells to be tuned and rehung with all new fittings in the existing frame; sound control system to be installed; ringing chamber to be reordered. | Nicholson Engineering Ltd | Andrew Nicholson |
| 12 | | Hamsterley nr Bishop Auckland, Durham, S James | Bells removed for future restoration. – On hold | Blyth & Co | Jo Blyth, Office Manager, Blyth & Co Ltd. |
| 13 | | Haverhill, Suffolk, S Mary V | The 12-cwt ring of six in this tower will be removed to the Foundry. They will be conserved, cleaned, and tuned. Two additional trebles will be cast to augment the ring to eight. All new ringing fittings and a new cast iron and steel bell frame will be manufactured to complete the project. – Not started | John Taylor & Co | David Potter |
| 14 | | Henley on Thames, Oxfordshire, S Mary V | Clapper work on bells 6/8 and 8/8 – On hold | Whites of Appleton | Marika Haseldine |
| 15 | | Hyde Heath, Buckinghamshire, S Andrew | Electronically controlled chiming hammer to be repaired | Whites of Appleton | Marika Haseldine |
| 16 | | Impington, Cambridgeshire, S Andrew | The headstock of the 2nd is currently being replaced by Tom Blyth with Hunts Bell Restoration Group as the hangers. The goal is to restore the ring to a fully ringable condition. | Huntingdonshire CB Restn Soc | David Richards |
| 17 | | Kilburn, North Yorkshire, S Mary | Three new treble bells will be cast, using the metal from bell 8/8 at Hunslet, S Mary V, Yorkshire, to augment this 12 cwt Taylor 1925 ring of three to six. New ringing fittings will be manufactured for the bells, and they will be hung in the vacant pits of the 1925 cast iron Taylor bell frame. | John Taylor & Co | David Potter |
| 18 | | Little Bromley, Essex, S Mary V | Bells to be removed to Loughborough for conservation and for the manufacture of all new ringing fittings. The ancient wooden bell frame will be repaired and strengthened before the bells are rehung. | John Taylor & Co | David Potter |
| 19 | | Liverpool, Merseyside, Our Lady & S Nicholas, Pier Head | The 11th bell headstock will be returned to Loughborough for the fitting of new gudgeons and bearings. | John Taylor & Co | David Potter |
| 20 | | Longworth, Oxfordshire, S Mary | To be augmented to 8 in a new clockwise frame. The Westley group will cast the new treble; a second-hand bell has been acquired via the Keltek Trust for the 2nd; and WBF cast the 3rd in 2017. – On hold | Whites of Appleton | Michele Winter |
| 21 | | Lullington, Derbyshire, All Saints | Bell wheels to be returned to Loughborough for re-soling and shrouding | John Taylor & Co | David Potter |
| 22 | | Lydlinch, Dorset, S Thomas a Becket | Ring to be augmented from five bells to six using a bell sourced via the Keltek Trust; bells to be tuned and rehung with new fittings in the existing frame. Scheduled to start January 2027 – Not started | Nicholson Engineering Ltd | Andrew Nicholson |
| 23 | | Lytham, Lancashire, S John Div | this 10 cwt six, its frame and fittings will be removed from the tower. A new two-tier cast-iron bell frame seated on a hardwood base will be manufactured, and the 1992 Eayre & Smith bell fittings will be fully refurbished | John Taylor & Co | David Potter |
| 24 | | Mackworth, Derbyshire, All Saints | Following the gutting of this church by fire the three bells have been removed to Loughborough. Reinstatement work has been ordered to include the repair of the oak bell frame, the conservation, welding and annealing of the three bells, and the manufacture of traditional fittings for stationary chiming using trigger action clappers | John Taylor & Co | David Potter |
| 25 | | Manchester, Greater Manchester, Cath and Collegiate Ch of S Mary, S Denys, & S George | Bells, frame, and fittings to be removed for a major restoration and augmentation. Three new treble bells to be cast to augment the ring to a ring of twelve plus sharp second. A new cast iron and galvanized steel bell frame for thirteen bells to be manufactured together with new ringing fittings (the bell wheel centres will be adapted and re-used). A new automatic chiming system of electro-magnetic chiming hammers and an Apollo Control unit will be installed on all thirteen bells. A new sound control system and belfry floor will be manufactured and installed | John Taylor & Co | David Potter |
| 26 | | Marksbury, Somerset, S Peter | Tune 6th; rehang mostly new fittings; new frame foundation,etc – On hold | Matthew Higby & Co | Matthew Higby |
| 27 | | Melsonby, North Yorkshire, S James Gt | Of the four existing bells: bell 2/4 is to be hung dead within the new frame and fitted with a solenoid hammer; bell 3/4 is to be put on display in the ringing chamber; bells 1/4 and 4/4 are to be sold. | Whites of Appleton | Peter Kirby, DAC Bells Advisor, Leeds Dio. |
| 28 | | Meppershall, Bedfordshire, S Mary V | Fittings to be overhauled; canon-retaining headstock on bell 2/6 to be replaced. Scheduled to start in 2027 – Not started | Whites of Appleton | Marika Haseldine |
| 29 | | Misterton, Nottinghamshire, All Saints | Subject to fund raising, it is intended to augment the ring from three to six bells; the existing treble bell is to be retired from the ring; the new front four bells are to be sourced via the Keltek Trust. The contract has not yet been awarded – Not started | | David Kelly |
| 30 | | Mudeford, Dorset, All Saints | The casting of a new 16” bell to replace one cracked when fire damaged the church. Bell to be hung dead with elecro-magnetic hammer for automatic chiming | John Taylor & Co | |
| 31 | | Newport, Shropshire, S Nicholas | Major maintenance including restoration of clappers, crown staples and rope roller boxes. Lift all bells and clean/replace bearings. | John Taylor & Co | David Potter |
| 32 | | Ottershaw, Surrey, Christ Church | Maintenance work to include refurbishment of rope roller boxes and re-soling and shrouding of the tenor wheel. – Not started | John Taylor & Co | David Potter |
| 33 | | Penshurst, Kent, S John Bapt | Bells out for retuning (around listed 5th bell which will remain untuned) and rehung with all new fittings. Bells 3 and 8 to have hairline cracks in their crowns welded and existing bell bolts filled in | Matthew Higby & Co | Matthew Higby |
| 34 | | Plymouth, Devon, Minster Ch of S Andrew | The cast iron and steel bell frame and all metal bell fittings to be descaled, cleaned and repainted | John Taylor & Co | David Potter |
| 35 | | Richmond, Greater London, S Mary Magd | The ring of eight is to be remodelled by retaining the James Bartlet bells (the present 7th, 6th & 4th) with the 7th becoming the new Tenor; the remaining bells will be stood down and five new bells will be cast, all being tuned and hung on new fittings in the existing frame | Whites of Appleton | |
| 36 | | Rickmansworth, Hertfordshire, S Mary V | A major recasting and augmentation will take place to create a new 24 cwt ring of twelve. The existing Taylor trebles, which date from 1935, will be re-tuned and become the 3rd & 4th of the new twelve. All new ringing fittings and a new cast iron and galvanised steel bell frame will be manufactured and installed to complete the project. In addition, a light treble and flat sixth will be cast and added to the ring of twelve to produce a light 10 | John Taylor & Co | David Potter |
| 37 | | Ringwood, Hampshire, S Peter & S Paul | Ring to be augmented from eight bells to ten; bells to be rehung with partially new, partially refurbished fittings in the existing, but extended, frame. Bells will be out of action from 01-05-26 to 10-10-26 | Whites of Appleton | Marika Haseldine & John Davey |
| 38 | | Ropley, Hampshire, S Peter | Cracked 4th to be recast and temporary 4th to be removed. – Not started | Matthew Higby & Co | Roger Booth |
| 39 | | Salt, Staffordshire, S James | bells to be removed to Loughborough for storage until funds become available to rehang | John Taylor & Co | David Potter |
| 40 | | Shalford, Essex, S Andrew | General overhaul; bell 2/5 to be removed for welding of a crack in the crown. | Nicholson Engineering Ltd | Roy Threadgold |
| 41 | | Sherborne, Dorset, Abbey Ch of S Mary V | General overhaul. Scheduled to start Spring 2027 – Not started | Nicholson Engineering Ltd | Andrew Nicholson |
| 42 | | Shipbourne, Kent, S Giles | Maintenance work to be carried out including the refurbishment of the rope roller boxes and the manufacture and fitting of “Galebreaker” screens at the louvres – Not started | John Taylor & Co | David Potter |
| 43 | | South Brent, Devon, S Petroc | This ring of six, bell frame and fittings to be removed to Loughborough for restoration. The 1937 Taylor cast iron bell frame to be cleaned by sand blasting and rebuilt on a new galvanized steel grillage. All the ringing fittings to be fully restored. – Not started | John Taylor & Co | David Potter |
| 44 | | St Hilary, Cornwall, S Hilary of Poitiers | Restoration – On hold | John Taylor & Co | John Baldwin |
| 45 | | Stockland Bristol, Somerset, S Mary Magd | Bells to be tuned and rehung with mainly new fittings in the existing, but strengthened, frame. | Matthew Higby & Co | Matthew Higby |
| 46 | | Stoke Albany, Northamptonshire, S Botolph | Bells to be removed to Loughborough for cleaning, tuning & conservation. New ringing fittings to be manufactured for all the bells before they are rehung in their existing bell frame. A new rope guide to be designed and manufactured to complete the project | John Taylor & Co | David Potter |
| 47 | | Three Bridges, West Sussex, S Richard | Bell to be hung on new wooden headstock in a new timber frame for stationary ringing | Local labour/guild/assn | Kye Leaver |
| 48 | | Walcot, Lincolnshire, S Nicholas | bells are unsafe so are to be removed to Loughborough for storage until a restoration scheme is agreed with the parish. | John Taylor & Co | |
| 49 | | Warkton, Northamptonshire, S Edmund | Major maintenance work to be undertaken, including lifting all the bells to clean/replace bearings, the manufacture and fitting of a new rope guide, work to clappers, rope rollers, & sliders, and the installation of flapper boards in the middle chamber. Galebreaker screens to be manufactured and fitted to the louvres | John Taylor & Co | David Potter |
| 50 | | West Chelborough, Dorset, S Andrew | Two ancient bells to be rehung for chiming | Nicholson Engineering Ltd | Andrew Nicholson |